## The Complete Guide to Converting Rod Pocket Drapes to Pinch Pleat Curtains

This guide will show you how to convert your rod pocket drapes to pinch pleat curtains.

The first step is to measure the width of the window and divide it by two. This will be the width of your fabric.

The second step is to measure the height of the window and divide it by two. This will be the height of your fabric.

The third step is to cut out a rectangle from your fabric that is twice as wide as it is tall, with a hem on one side and a seam allowance on the other side.

The fourth step is to fold over one edge of this rectangle so that it meets up with the other edge, then sew them together using a straight stitch or zigzag stitch, depending on what type of fabric you are

## What is a Rod Pocket Drapes and How Do You Convert Them?

Rod pocket drapes are a type of curtains that have a rod pocket on the back. They are often used in place of pinch pleat curtains because they are easier to install and can be made with less fabric.

The first step is to measure the width of your window and divide it by two. This will give you the width of your curtain panels. The next step is to measure the height of your window and divide it by two. This will give you the height of your curtain panels.

The last step is to cut out fabric for each panel, making sure that they are long enough for both sides and have an extra inch on each side for hemming.

## How to turn curtains into drapes?

Rod pocket curtains are a type of window covering that is hung from a rod. They are typically made of fabric and have a pocket at the top to insert the rod. Rod pocket curtains can be converted into pinch pleat curtains by following these steps:

1) Measure the width of your window and add 1 inch to it. This will be the width of your fabric.

2) Cut two pieces of fabric to this length, one for each side.

3) Sew together one side, leaving an opening for turning it right-side out.

4) Turn it right-side out and sew up the opening you left in step 3.

5) Sew together the other side, leaving an opening for turning it right-side out.

6) Turn it

## How to use pinch pleat hooks with rod pocket drapes?

Pinch pleat hooks are a great way to convert rod pocket drapes to pinch pleat curtains. They are easy to install and can be done in just a few minutes.

The first step is to measure the width of the rod pocket drapes. The width should be at least 1 inch wider than the width of the pinch pleat hooks that you will use. For example, if you want to use 1-inch wide pinch pleat hooks, then your rod pocket drapes should be at least 2 inches wide.

The next step is to measure the height of your window and divide it by two. This will give you the height of each panel that you need for your pinch pleat curtains. For example, if your window is 60 inches high, then each

## How to Convert Rod Pocket Drapes into Pinch Pleat Curtains

Pinch pleats are a type of curtain that is made by folding fabric in half and then sewing the two sides together. This creates a pleat that can be sewn to the top of the curtain rod.

The first step is to measure your window and cut your fabric to size. You will need two pieces of fabric, one for each side of the window. The width should be twice as wide as your window, and the length should be three times as long as your window plus an extra 12 inches for each side.

Next, you will need to fold one piece of fabric in half so that it is now twice as wide but still three times as long. Sew this piece together on both sides so that it forms a tube with a seam down the middle. This will create

## How To Make Pinch Pleat Curtains From Rod Pocket Drapes

Pinch pleats are a type of pleat that is created by folding the fabric in half and then pinching it together. This creates a small, neat fold that can be sewn into place.

The first step is to measure the width of your curtain rod and divide it by two. This will give you the width of your pinch pleat panels. For example, if your curtain rod is 3 inches wide, then you would need to cut your panels to 1 inch wide.

Next, measure the length of your curtains and divide it by two. This will give you the length of your pinch pleat panels. For example, if your curtains are 60 inches long, then you would need to cut them down to 30 inches long for each panel.

## The Best Way To Convert Rod Pocket Drapes Into Pinch Pleat Curtains

Pinch pleat curtains are a great way to convert rod pocket drapes into curtains. They are easy to make and can be made in any size.

The first step is to measure the width of the rod pocket drapes and then cut two pieces of fabric that are twice as wide as the measurement. The fabric should be cut so that it is twice as long as the measurement, but not more than four times as long.

The next step is to fold one piece of fabric in half lengthwise and then fold it in half again so that it creates a rectangle with two folds on either side.

Then, take the other piece of fabric and do the same thing, but this time with one fold on either side.

Next, place one piece of folded