Table Of Contents
The Complete Guide to Hanging Curtains with Crown Molding
This article will show you how to hang curtains with crown molding.
The first step is to measure the height of the window and the length of the curtain rod. The height of the window should be measured from the floor to where you want your curtains to stop. The length of your curtain rod should be measured from where you want your curtains to start, which is usually at eye level, and then add an extra 12 inches for a seam allowance.
Next, measure how much fabric you need for each panel. You will need two panels per window, so measure twice as much as what you need for one panel. For example, if you need two panels that are 60 inches wide by 84 inches long, then measure 120 inches wide by 84 inches long for each panel.
What is Crown Molding?
Crown molding is a type of trim that is installed on the top edge of a wall. It can be used to cover up imperfections in the wall, such as nail holes or gaps.
Crown molding is typically made from wood and has a decorative profile. It can be installed on either side of the wall, but it’s usually installed on the top edge of the wall.
Where to hang curtains with crown molding?
Hanging curtains with crown molding is a tricky task. You need to know where to hang them and how to do it.
The first thing you need to do is measure the height of the window and the length of the curtain rod. The height of the window should be at least two inches higher than the length of your curtain rod. If you are using a long curtain rod, then you should measure from the top of your window frame to make sure that it will fit in between your crown molding.
Next, you need to measure how far down from your ceiling you want your curtains to hang. This will depend on what type of look you are going for and what type of windows or doors are in front of them. For example, if there is a door in front of them
How to Hang Curtains with Crown Molding
Hanging curtains with crown molding is a great way to add a decorative touch to your windows. It can also be used as a way to cover up the top of the window frame.
The first step is to measure the height of your window and then measure the length of your curtain rod. You will need to make sure that you have enough room for both measurements.
The next step is to measure the height of your window and then measure the length of your curtain rod. You will need to make sure that you have enough room for both measurements.
The last step is hanging up your curtains with crown molding!
Hanging Curtains on a Sloped Ceiling
Hanging curtains on a sloped ceiling can be tricky. The best way to do it is to measure the height of the ceiling and then measure the length of the curtain rod. You will need to hang the rod at a height that is higher than the sloped ceiling.
The curtains should be hung at a height that is higher than the sloped ceiling.
The Best Way to Hang Curtains With Crown Moldings
The best way to hang curtains with crown moldings is to use a rod that is long enough to go over the top of the molding. This will allow you to hang your curtains without having them touch the floor.