Table Of Contents
- The Complete Guide to Hanging Non-Pinch Pleated Drapes on a Traverse Rod
- What is a Traverse Rod?
- What kind of drapes are pinned and worked via pull string.?
- Which is better a gromet vs travis curtin drapes?
- Which is more stylish pinch pleated or back tabbed drapes?
- How to Hang Non-Pinch Pleated Drapes on a Traverse Rod
- The Best Way To Hang Non-Pinch Pleated Drapes On A Traverse Rod
- Creator Spotlight Video:
The Complete Guide to Hanging Non-Pinch Pleated Drapes on a Traverse Rod
This article will provide you with a step-by-step guide on how to hang non-pinch pleated drapes on a traverse rod.
The first thing you need to do is measure the length of the traverse rod. You will need to measure from the top of the rod to where you want your drapes to end. Once you have this measurement, add an extra 12 inches for each side of your window. This will give you enough fabric for your drapes and allow them to be pulled back and out of the way when not in use.
Next, measure the width of your window and divide it by two. This will give you how wide each panel should be cut out from your fabric. For example, if your window is 36 inches wide, then
What is a Traverse Rod?
A traverse rod is a type of curtain rod that is installed on the wall. It can be used to hang curtains or drapes.
A traverse rod is a type of curtain rod that is installed on the wall. It can be used to hang curtains or drapes. The installation process for this type of curtain rod is very simple and does not require any drilling or screws.
What kind of drapes are pinned and worked via pull string.?
The traverse rod is a type of curtain rod that is mounted horizontally across the window. It can be installed on either side of the window, and it can be used to hang curtains from both sides.
There are two ways to hang non-pinch pleated drapes on a traverse rod:
1) The first way is to use a double traverse rod. This will allow you to hang two sets of curtains, one on each side of the window. You will need two sets of drapery hooks and rings for this method.
2) The second way is to use a single traverse rod with an extra set of drapery hooks and rings. This will allow you to hang one set of curtains on each side of the window, but it will not provide as much privacy
Which is better a gromet vs travis curtin drapes?
The traverse rod is a type of curtain rod that is mounted horizontally across the window. It is typically installed on the top of the window frame, and it can be used to hang curtains from either side.
There are two ways to hang non-pinch pleated drapes on a traverse rod:
1) Hang them from both sides of the traverse rod. This will give you more coverage and more privacy, but it will also make your windows look smaller.
2) Hang them from one side of the traverse rod. This will give you less coverage and less privacy, but it will make your windows look bigger.
Which is more stylish pinch pleated or back tabbed drapes?
Pinch pleated drapes are the most popular type of drapery. They are also the easiest to hang.
The first step is to measure the width of your window and divide it by two. This will give you the width of your drapery panels. The next step is to measure the height of your window and divide it by two. This will give you the height of your drapery panels.
The third step is to measure how far down you want your drapes to hang from the rod, and then add that measurement to both sides of each panel length measurement from step one. For example, if you want your drapes to hang down 12 inches from a traverse rod, then add 12 inches on both sides of each panel length measurement from step
How to Hang Non-Pinch Pleated Drapes on a Traverse Rod
The first step is to measure the traverse rod. The rod should be at least 1 inch longer than the width of the window.
The second step is to measure the length of the drapes. The length should be at least 2 inches longer than the width of the window.
The third step is to attach a drapery clip to each end of the traverse rod, and then attach a drapery clip to each end of one side of the drape.
Next, attach a drapery clip to each end of another side of the drape and then hang it on top of one side that has already been hung up.
Finally, use a drapery clip on each end and hang it on top of one side that has already been hung up
The Best Way To Hang Non-Pinch Pleated Drapes On A Traverse Rod
The best way to hang non-pinch pleated drapes on a traverse rod is to use a drapery rod that is at least 1.5 inches in diameter.
Non-pinch pleated drapes are hung by using drapery hooks on a traverse rod that are attached to the top of the traverse rod. The hooks should be placed about 12 inches apart and should be placed at least 1.5 inches from the wall.