Table Of Contents
- The Complete Guide to Making Lined Drapes
- What is a lined drape?
- How do you make lined drapes?
- How to add curtain liner to ready made drapes?
- How to measure and cut fabric for lines drapes?
- How to shorten lined drapes by removing pleated top?
- What type stitch to use on lined drapes?
- How to Make Lined Drapes
- How To Press the Seams When Making Lined Drapes
- The Complete Guide To Making Lined Drapes
- Creator Spotlight Video:
The Complete Guide to Making Lined Drapes
This article will provide you with the necessary information to make lined drapes.
The first step is to measure the width of your window and then add an inch for seam allowance. Next, measure the height of your window and add an inch for seam allowance.
The next step is to cut out two pieces of fabric that are the same size as your measurements.
Next, sew a hem on one side of each piece of fabric and then sew them together with right sides facing each other.
Then, fold over the top edge by 1/2 inch and sew it down so that it creates a casing for a rod pocket.
Finally, turn it inside out so that the right side is now on the outside and iron it flat.
What is a lined drape?
A lined drape is a type of drapery lining that is used to cover the back of a window or door. It can be made from any fabric, but it is usually made from a heavier fabric such as cotton or linen.
The lining helps to block out light and noise, and it also helps to insulate the room from cold drafts. It can also help to reduce noise pollution by absorbing sound waves.
How do you make lined drapes?
The seams of lined drapes are pressed in one direction. The lining is sewn to the top of the curtain, and then the lining is turned over and sewn to the bottom of the curtain.
How to add curtain liner to ready made drapes?
The seams of the curtain liner should be pressed in the same direction as the seams of the curtains.
How to measure and cut fabric for lines drapes?
The first step is to measure the width of the fabric. The width of the fabric should be at least twice as wide as the desired finished width of the drape.
The second step is to measure and cut a length of fabric that is twice as long as you want your finished drape to be.
The third step is to fold one end over so that it meets with the other end, and then press it flat.
The fourth step is to fold this piece in half again, so that it creates a long rectangle shape.
The fifth step is to fold this rectangle in half again, so that it creates a long rectangle shape with two layers of fabric on either side.
Finally, you will need to sew up both sides of this rectangle until you reach your
How to shorten lined drapes by removing pleated top?
The lining of the drapes should be pressed in the opposite direction to the fabric.
What type stitch to use on lined drapes?
The most common way to press the seams on lined drapes is to use a zigzag stitch. This will help the seam to lay flat and not show through the fabric.
The zigzag stitch is also a good choice for lining curtains because it helps keep the fabric from fraying.
How to Make Lined Drapes
Lined curtains are a great way to add a touch of elegance to your home. They can be used in any room, but they are especially popular in bedrooms and living rooms.
There are many ways to line curtains, but the easiest way is with a store-bought liner. You can also make your own liner by sewing together two pieces of fabric that match the color of your curtains.
How To Press the Seams When Making Lined Drapes
The seams in drapery lining are pressed with a hot iron. The seams should be pressed from the top of the fabric to the bottom. This will ensure that the fabric is flat and smooth.
The seams in drapery lining are pressed with a hot iron. The seams should be pressed from the top of the fabric to the bottom. This will ensure that the fabric is flat and smooth.
The Complete Guide To Making Lined Drapes
This article will provide you with the necessary information to make lined drapes.
The first step is to measure the width of your window and then add an inch for seam allowance. Next, measure the height of your window and add an inch for seam allowance.
The next step is to cut out two pieces of fabric that are the same size as your measurements.
Next, fold one piece in half lengthwise and then fold it in half again so that it is now a quarter of its original size. Repeat this process with the other piece of fabric.
Now, take one piece and place it on top of the other so that they are right sides together and pin them together at each end. Sew them together using a 1/2 inch seam allowance all around except for